Formulation, and optimization of transdermal Atorvastatin Calcium-Loaded Ultra-flexible vesicles; ameliorates poloxamer 407-caused dyslipidemia.

Atorvastatin calcium (AC), a cholesterol-lowering medication, has limited oral bioavailability (14 %) and adverse impacts on the gastrointestinal tract (GIT), liver, and muscle. So, in an effort to improve the poor availability and overcome the hepatotoxicity complications attendant to peroral AC administration, transdermal transfersomal gel (AC-TFG) was developed as a convenient alternative delivery technique. The impact of utilizing an edge activator (EA) and varying the phosphatidylcholine (PC): EA molar ratio on the physico-chemical characteristics of the vesicles was optimized through a Quality by Design (QbD) strategy. The optimal transdermal AC-TFG was tested in an ex-vivo permeation study employing full-thickness rat skin, Franz cell experiments, an in-vivo pharmacokinetics and pharmacodynamics (PK/PD) evaluation, and a comparison to oral AC using poloxamer-induced dyslipidemic Wister rats. The optimized AC-loaded TF nanovesicles predicted by the 23-factorial design strategy had a good correlation with the measured vesicle diameter of 71.72 ± 1.159 nm, encapsulation efficiency of 89.13 ± 0.125 %, and cumulative drug release of 88.92 ± 3.78 % over 24 h. Ex-vivo data revealed that AC-TF outperformed a free drug in terms of permeation. The pharmacokinetic parameters of optimized AC-TFG demonstrated 2.5- and 13.3-fold significant improvements in bioavailability in comparison to oral AC suspension (AC-OS) and traditional gel (AC-TG), respectively. The transdermal vesicular technique preserved the antihyperlipidemic activity of AC-OS without increasing hepatic markers. Such enhancement was proven histologically by preventing the hepatocellular harm inflicted by statins. The results showed that the transdermal vesicular system is a safe alternative way to treat dyslipidemia with AC, especially when given over a long period of time.

Mucoadhesive thermoreversible formulation of metoclopramide for rectal administration: a promising strategy for potential management of chemotherapy-induced nausea and vomiting.

The study aimed to investigate the feasibility of incorporation of metoclopramide hydrochloride (MCP HCl) in mucoadhesive thermoreversible liquid suppository (MCP HCl-LS) to bypass the first-pass metabolism and maximize its efficacy to be a promising substitute for parenteral therapy. MCP HCl-LS was formulated using Pluronic (PF127/PF68) and hydroxypropylmethylcellulose (HPMC) and in vitro evaluated through their gelation temperature, gel strength (GS), mucoadhesive force, and in vitro release studies. Also, the MCP HCl-LS was evaluated for its rheological behavior and examined for rectal mucosal integrity after administration. The results revealed that the MCP HCl-LS; composed of PF127/PF68/HPMC (20/7/0.5% w/w) was in the liquid state at room temperature, experienced gelation at 30.23 °C, with suitable GS of 28.66 s and rectal retention force of 43.03 × 102 dyne/cm2. The pharmacokinetic data showed that the MCP HCl-LS exhibited a significant increase (p < 0.05) in AUC0-480 (219.688 vs 172.333 ng.h.mL-1 of the marketed) and 1.3-fold increase in relative bioavailability compared to Primperan® suppository, indicating that LS formula bypassed the first-pass metabolism. Moreover, MCP HCl-LS did not cause any morphological harm to the rectal tissues suggested that the developed formulation was safe and could be a potentially useful alternative drug carrier for rectal delivery of MCP HCl in patients experiencing chemotherapy-induced nausea and vomiting.

Formulation and Characterization of Nanosized Ethosomal Formulations of Antigout Model Drug (Febuxostat) Prepared by Cold Method: In Vitro/Ex Vivo and In Vivo Assessment.

Febuxostat (FXT) is a xanthine oxidase (XO) drug which indicated for the treatment of gout. FXT loaded nanosized ethosomes were prepared using cold method with varied concentrations of ethyl alcohol and soya lecithin (SL). The prepared ethosomes were characterized by size, entrapment efficiency (DEE), FT-IR, in vitro release, kinetic studies of in vitro release profile, in vitro skin permeation and deposition, and stability study. The selected ethosomal formulation was incorporated in HPMC gel and characterized for drug content, ex vivo diffusion study through rat skin, and in vivo study and determination of pharmacokinetic parameters using HPLC technique. The results of size analysis showed that minimum size was 124.2 ± 16.77 nm with PDI values between 0.2 and 0.6. The zeta potential was from - 43.5 ± 3.0 to - 20.6 ± 1.42 mV. DEE ranged from 48 to 86%. The results of in vitro skin permeation showed that the amount FXT permeated ranged from 43.33 ± 5.3 to 82.14 ± 5.8%, flux ranged from 14.85 to 28.02. The results of ex vivo study showed that the amount of FXT permeated from unprocessed FXT gel was 49.42 ± 3.29% which was lesser than from FXT ethosomal gel. The results of in vivo study showed that Cmax and tmax were significantly different and higher for transdermal administration of FXT than oral administration. The developed FXT nanosized selected ethosome-based transdermal drug delivery gel system would provide a promising method for better management of gout.

Response surface methodology for the development of self-nanoemulsified drug delivery system (SNEDDS) of all-trans-retinol acetate.

UNLABELLED: The purpose was to prepare, characterize, and optimize a self-nanoemulsified drug delivery system (SNEDDS) of a model lipophilic compound, all-trans-retinol acetate. As part of the optimization process, the main effects, interaction effects, and quadratic effects of the formulation ingredients were investigated. METHOD: A three-factor, three-level Box-Behnken design was used to explore the quadratic response surfaces and construct a second-order polynomial model in the form: Y = A + A1X1 + A2X2+ A3X3 + A4X1X2 + A5X2X3 + A6X1X3+ A7X1(2) + A8X2(2) + A9X3(2) + E. Amount of added oil (X1), surfactant (X2), and cosurfactant (X3) were selected as the factors. Particle size (Y1), turbidity (Y2), and cumulative amount of the active ingredient emulsified after 10 (Y3) and 30 (Y4) min were the observed variables. Response surface plots were used to demonstrate the effect of factors (X1), (X2), and (X3) on the response (Y4). Amount of added soybean oil (X1), Cremophor EL (X2), and Capmul MCM-C8 (X3) showed a significant effect on the emulsification rates, as well as on the physical properties of the resultant emulsion (particle size and turbidity). Observed and predicted values of Y4 obtained from the constructed equations were in close agreement. Response surface methodology was then used to predict the levels of factors X1, X2, and X3 under the constrained variables for an optimum response. Applied constraints were 0 < Y1 < 0.5, 1 < Y2 < 20, 60 < Y3 < 80, and 90 < Y4 < 100. The predicted values were 0.0704 microm for particle size (Y1), 18.95 NTU for turbidity (Y2), 88.88% for drug release after 10 min (Y3), and 110.7% drug release after 30 min (Y4). Two new formulations were prepared according to the predicted levels. The observed and predicted values were in close agreement.

Salbutamol sulfate suppositories: influence of formulation on physical parameters and stability.

PURPOSE: To prepare and evaluate a suppository dosage form of salbutamol sulfate. The prepared formulae with and without different concentrations of gels were tested for hardness, melting time, content uniformity, and drug release. The stability of some of the selected formulae was assessed. METHODS: Salbutamol sulfate was formulated as a rectal suppository with emulsifying fatty bases (suppocire and witepsol) and water-soluble bases (PEG) adopting the molding from a melt technique. Physical characteristics and dissolution profiles of the prepared formulations were determined as the responses. The effects of adding gels, methyl cellulose (MC), and Eudispert (Eud) and their concentrations (1, 3, and 6%) on these responses were also investigated. Formulations showing high rank order were scaled up for shelf-life stability study for one year. RESULTS: The results showed that all the investigated formulae have acceptable physical characteristics with respect to hardness, melting time (except F7), and uniformity of drug content. The amount of drug dissolved in 100 min of dissolution time was inversely affected by the melting point of the fatty base. The release from PEG bases was found to be molecular weight dependent. Addition of 1% MC or Eud gel increased the release from all the investigated formulae. Increasing gel concentration to 3% then to 6% showed different effects on the release. The degradation of salbutamol sulfate in the investigated formulae was found to be a first-order reaction. CONCLUSIONS: Rectal suppository of salbutamol sulfate could be prepared as an alternative to the oral dosage form to circumvent the first-pass metabolism.

In vitro release studies of flurbiprofen from different topical formulations.

The release profiles of flurbiprofen (F) from different gel and ointment formulations were studied in order to evaluate factors governing the release process. Carbopol 934P (CAB), poloxamer 407 (POL), and eudragit S100 (EUD) gel bases were used, while emulsion (EML) and polyethylene glycol (PEG) ointments were employed. The release studies were conducted using membraneless diffusion cells and lipophilic receptor medium, isopropyl myristate (IPM). The effects of gelling agent concentrations and the initial drug load on drug release were determined. Hydrogels were observed to give higher amounts of drug release than hydrophobic EUD gel and ointments, despite the lower bulk viscosity of these bases. Flurbiprofen release from CAB gels was 3.06-1.56-fold higher than from other formulations. Over a 4-hr period, the amount of F released was 492.8 and 316.0 micrograms/cm2 from 2% CAB and 25% POL gels, while it was 213.05, 168.61, and 160.9 micrograms/cm2 from EML, 40% EUD, and PEG bases, respectively. The diffusivity of F in the gel bases was an inverse function of the polymer concentrations over the range of 1-3% CAB, 20-30% POL, and 35-45% EUD gels. Drug release was increased from the bases as the initial F concentration increased over the range 0.25-1.0%, while the diffusion coefficient observed an inverse relationship. The CAB and POL gels could be the vehicles of choice for the rapid release and onset of F after topical application.